CipherLab 1266 Manual do Utilizador

1166/1266 Bluetooth Wireless Scanners User’s Manual Document Number: 1X66-1 Release Date: Dec. 2005  2005, SYNTECH INFO

13131313 4.2 RS232 Interface User can select the desired, flow control, baud rate, parity, and data bits to be used in this output interface. 4.2.1

15151515 5. Bluetooth Serial Port The 1166/1266 can be configured to the standard Bluetooth Serial Port as the data output interface. This will mak

17171717 3. Check My device is set up and ready to be found and click Next button. 4. Select 1x66 scanner and click Next button for next step. 6

19191919 3. Select Client Applications tab and select Bluetooth Serial Port from the list then click Property button. 4. Check Secure Connection if

21212121 8. Click OK button. After successful connection

23232323 6.1.3 Authentication & PIN Code The 1x66 scanner can do connection authentication if communication security is desired. Once this setti

25252525 6.3 Configuring Bluetooth Device Driver Please follow the procedures below to configure the Bluetooth driver on the host system. Please no

27272727 8. The scanner is ready to use. Please click OK button. 6.3.2 Widcomm Bluetooth Driver 1. Click icon at PC. 2. Click Find Bluetooth

29292929 8. When the green arrow icon is displayed, the connection is ready. 30 7. Symbology Parameters This section describes user con

31313131 • Checksum Transmission: This parameter specifies whether the checksum character is included in the data being transmitted. • Code L

Table of Contents REVISION HISTORY...1 1. INTRODUCTION...

33333333 • Checksum Verification: Three kinds of checksum calculations can be implemented into MSI code: Single Modulo 10, Double Mod

35353535 8. Data Output Format Data read by the scanner will be processed in the following sequence (RS-232, Keyboard Wedge and USB int

37373737 9. Data Editing The 1166/1266 scanner provides advanced data editing functions for data formatting. Data editing is performed acc

39393939 always included in the field. User though, has the option of discarding this terminating string. • Field Length: The field division can be

41414141 10. Configuring your 1166/1266 The configuration of 1166/1266 Scanner is done by reading the setup labels contained in the C

43434343 The available key type/status settings can be selected will be described briefly. The configuration procedures for character string paramete

1166/1266 Bluetooth Wireless Scanners User’s Manual Document Number: 1X66-2 Release Date: Dec. 2005  2005, SYNTECH INFORMAT

RSS14 Parameters...37 RSS Limited Parameters ...

1 Update Restore Default Settings Exit Setup without Changes Set Connection * Programming Instructions: (1) Read the label. (2) Read t

3 Update List Setting Page1 Page 6 Page 2 Page 7 Page 3 Page 8 Page 4 Page 9 Page 5 Page 10 Buzzer Settings <

7.8 EAN13 ...32 7.9 MSI ...

5 Update Scanner Time-out Duration * Programming Instructions: (1) Read the label. (2) Program the desired time-out duration by reading Decimal Digi

7 Update • Keyboard Alphabets Layout < Default Layout > AZERTY QWERTZ • Keyboard Digits Layout < Default Layout >

9 Update RS-232 Parameters • Activate RS232 Interface • Baud Rate 115200 38400 11920

11 Update Bluetooth Serial Port Parameters • Activate Bluetooth Serial Port Interface • Device Name Broadcasting < Yes > No • Authe

13 Update • Authentication Yes < No > • PIN Code * Programming Instructions: (1) Read the label. (2) Program the desired character

15 Update Prefix / Postfix Settings Prefix Code * Postfix Code * Character Substitution Set 1 * Set 2 * Set 3 * Programming In

17 Update Length Code Setting (2 digits) • Code 39 Length Code Enable < Disable > • Italy Pharmacode Length Code Enable <

19 Update • Code 93 Length Code Enable < Disable > • Code 128 Length Code Enable < Disable > • EAN128/RSS Length Cod

21 Update • Matrix 25 Enable < Disable > • Codabar < Enable > Disable • Code 93 < Enable > Disable •

23 Update • UPCE < Enable No Addon > Disable No Addon Enable Addon2 < Disable Addon2 > Enable Addon5 < Disable A

1111 Revision History Version Release Date Notes V 1.00 Oct. 31, 2005 First release. V 2.00 Dec. 30, 2005 Supports Bluetooth HID. Firmware vers

25 Update Code39 Parameters • Standard / Full ASCII Code39 < Standard > Full ASCII • Start / Stop Transmission Enable <

27 Update • Max / Min Code Length Qualification Select Max / Min Length Qualification Max Length * Min Length * • Fixed Code Length Qualif

29 Update • Fixed Code Length Qualification Select Fixed Length Qualification Fixed Length 1 * Fixed Length 2 * Programming Instructions:

31 Update Start / Stop Selection < abcd / abcd > abcd / tn*e ABCD / ABCD ABCD / TN*E Plessey Parameters • Convert to UK Plessey

33 Update • Fixed Code Length Qualification Select Fixed Length Qualification Fixed Length 1 * Fixed Length 2 * Programming Instructions:

35 Update UPCE Parameters • System Number Selection System Number 0 and 1 < System Number 0 only > • Convert to UPCA Enable

37 Update RSS Code ID Selection ]C1 < ]e0 > RSS14 Parameters • Code ID Transmission < Enable > Disable • Applicat

39 Update Activate Editing Formats • Format 1 Enable < Disable > • Format 2 Enable < Disable > • Format 3 Enable

41 Update • Applicable Data Length Maximum Length * Minimum Length * Programming Instructions: (1) Read the label. (2) Program the desired

43 Update • Applicable Code Type All Clear Code 39 Italy Pharmacode French Pharmacode Industrial 25 Interleave 25 Matrix 2

3333 2. 3666 Installation The 1166/1266 kit contains: A 1166/1266 wireless barcode scanner A 3666 base A rechargeable battery A Serial/Keyboard/US

45 Update • Field1 Setting Divide Field by Field Terminating String Field Terminating String * Programming Instructions: (1) Read the label.

47 Update • Field3 Setting Divide Field by Field Terminating String Field Terminating String * Programming Instructions: (1) Read the label. (2) P

49 Update • Field5 Setting Divide Field by Field Terminating String Field Terminating String * Programming Instructions: (1) Read the label. (2) P

51 Update • Field Transmission Sequence Start Field 1 Additional Field 1 Field 2 Additional Field 2 Field 3 Additional Field 3

53 Update Hexadecimal Digits 0 8 1 9 2 A 3 B 4 C 5 D 6 E 7 F • Validate 54 Enter Setup Key Type

55 Update KBD Wedge Character Table 0 1 2 3 4 5 6 7 8 0 F2 SP 0 @ P ` p  1 Ins F3 ! 1 A Q a q  2 Del F4 " 2 B R b r  3 Home F5 # 3 C S c

5555 2.4 Charging your 1166/1266 There are three methods to charge the battery. One is placing the scanner on the base and another is inserting the

7777 3. General Features 3.1 Buzzer The buzzer of the scanner beeps differently to indicate various operating conditions. • Power On Beep: The

9999 3.5 Re-read Delay If the scanner mode is set to Continuous, Auto Power Off, Alternate, or Momentary mode, the scanner will prevent accide

11111111 4. Output Interface (3666 Base Unit) The 1166/1266 is a multi-interface scanner. It can be used as a keyboard wedge scanner,